Datasheet

SPEC NO: DSAA8433

REV NO: V.6 DATE:

MAR/24/2005 PAGE:

APPROVED: J. Lu

CHECKED: Allen Liu DRAWN: H.Q.YUAN

Package Dimension

7104SEC

H HYPER ORANGE

Description

This devices are made with TS InGaAIP.

1 (3mm) SOLID STATE LAMP

Features

LOW POWER CONSUMPTION.

POPULAR T

1 DIAMETER PACKAGE.

GENERAL PURPOSE LEADS.

RELIABLE AND RUGGED.

LONG LIFE

SOLID STATE RELIABILITY.

AVAILABLE ON TAPE AND REEL.

RoHS COMPLIANT.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is

0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

PAGE 1
T-1 (3mm) SOLID STATE LAMP L-7104SEC-H HYPER ORANGE Features Description OPOPULAR T-1 DIAMETER PACKAGE. This devices are made with TS InGaAIP. OLOW POWER CONSUMPTION. OGENERAL PURPOSE LEADS. ORELIABLE AND RUGGED. OLONG LIFE - SOLID STATE RELIABILITY. OAVAILABLE ON TAPE AND REEL. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4.
PAGE 2
Selection Guide Part No. Dice L-7104SEC-H Iv (mcd) @ 20mA Lens Type HYPER ORANGE (InGaAlP) WATER CLEAR Viewing Angle Min. Typ. 2θ1/2 1800 3500 34° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Orange λD Dominant Wavelength ∆λ1/2 Max.
PAGE 3
Hyper Orange L-7104SEC-H Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA8433 REV NO: V.6 DATE: MAR/24/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.