Datasheet

SPEC NO: DSAA5802 REV NO: V.6 DATE: MAR/17/2005 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI

Package Dimensions

-1 (3mm) SOLID STATE LAMP

Features







LOW POWER CONSUMPTION.







POPULAR T-1 DIAMETER PACKAGE.







GENERAL PURPOSE LEADS.







RELIABLE AND RUGGED.







LONG LIFE - SOLID STATE RELIABILITY.







AVAILABLE ON TAPE AND REEL.







RoHS COMPLIANT.

Description

The High Efficiency Red source color devices

are made with Gallium Arsenide Phosphide on

Gallium Phosphide Orange Light Emitting

Diode.

L-7104IT HIGH EFFICIENCY RED

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

PAGE 1
T-1 (3mm) SOLID STATE LAMP L-7104IT HIGH EFFICIENCY RED Description Features The High Efficiency Red source color devices LOW POWER CONSUMPTION. POPULAR T-1 DIAMETER PACKAGE. are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting GENERAL PURPOSE LEADS. Diode. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.
PAGE 2
Selection Guide Part No. Dice L-7104IT Iv (mcd) @ 10mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) RED TRANSPARENT Viewing Angle Min. Typ. 2 θ 1/2 18 60 34° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD Dominant Wavelength ∆λ1/2 Max.
PAGE 3
High Efficiency Red L-7104IT Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA5802 REV NO: V.6 DATE: MAR/17/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.