Datasheet

SPEC NO: DSAB3432 REV NO: V.4 DATE: JUN/10/2005 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN

Package Dimensions

T-1 (3mm) SOLID STATE LAMP

Features



LOW POWER CONSUMPTION.



POPULAR T-1 DIAMETER PACKAGE.



GENERAL PURPOSE LEADS.



RELIABLE AND RUGGED.



LONG LIFE - SOLID STATE RELIABILITY.



AVAILABLE ON TAPE AND REEL.

Description

The Bright Red source color devices are made

with Gallium Phosphide Red Light Emitting Diode.

L-7104HD BRIGHT RED

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

PAGE 1
T-1 (3mm) SOLID STATE LAMP L-7104HD Features BRIGHT RED Description LOW POWER CONSUMPTION. The Bright Red source color devices are m ade POPULAR T-1 DIAMETER PACKAGE. with Gallium Phosphide Red Light Emitting Diode. GENERAL PURPOSE LEADS. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.
PAGE 2
Selection Guide Part No. Dice L-7104HD Iv (mcd) @ 10mA Lens Type BRIGHT RED (GaP) RED DIFFUSED Viewing Angle Min. Typ. 2θ θ1/2 1 3 40° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Bright Red λD Dominant Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Bright Red L-7104HD Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB3432 REV NO: V.4 DATE: JUN/10/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.