Datasheet

SPEC NO: DSAD3602 REV NO: V.3 DATE: APR/07/2007 PAGE: 2 OF 3
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at T
A=25°C
Part No.
Dice Lens Type
Iv (mcd)
V=9V
V
iewing
Angle
Min. Typ.
2θ1/2
L-616BSRD-B SUPER BRIGHT RED (GaAIAs) RED DIFFUSED 50 200
60°
Parameter Super Bright Red Units
Power dissipation 310 mW
Forward Voltage 14 V
Reverse Voltage 0.5 V
Operating Temperature -40°C To +70°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 5 Seconds
Notes:
1. 2mm below package base.
2. 5mm below package base.
Symbol Parameter Device Min. Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength Super Bright Red 660 nm
λD
Dominate Wavelength Super Bright Red 640 nm
Δλ1/2
Spectral Line Half-width Super Bright Red 20 nm
IF Forward Current Super Bright Red 8 22 mA
Min:VF=3.5V
Typ:V
F=5V
ISON Supply Current Super Bright Red 8 mA VF = 3.5V
ISON Supply Current Super Bright Red 44 mA VF = 14V
f Blink Frequency Super Bright Red 1.5 3 Hz VF = 3.5V ~ 14V