Datasheet

SPEC NO: DSAD3600 REV NO: V.3 DATE: APR/11/2007 PAGE: 1 OF 3

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU

Package Dimensions

Part Number: L-616BHD BRIGHT RED

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

Features

●T-1 PACKAGE WITH RECTANGULAR BASE.

●WITH BUILT-IN BLINKING IC.

●OPERATION VOLTAGE FROM 3.5V TO 14V.

●BLINKING FREQUENCY FROM 3.0Hz TO 1.5Hz.

●RoHS COMPLIANT.

T-1 (3mm) BLINKING LED LAMP

Description

The Bright Red source color devices are made with Gallium

Phosphide Red Light Emitting Diode.

PRELIMINARY SPEC

PAGE 1
T-1 (3mm) BLINKING LED LAMP PRELIMINARY SPEC Part Number: L-616BHD BRIGHT RED Features Description ●T-1 PACKAGE WITH RECTANGULAR BASE. The Bright Red source color devices are made with Gallium ●WITH BUILT-IN BLINKING IC. Phosphide Red Light Emitting Diode. ●OPERATION VOLTAGE FROM 3.5V TO 14V. ●BLINKING FREQUENCY FROM 3.0Hz TO 1.5Hz. ●RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.
PAGE 2
Selection Guide Dice Part No. L-616BHD Iv (mcd) V=9V Lens Type BRIGHT RED (GaP) RED DIFFUSED Viewing Angle Min. Typ. 2 θ 1/2 0.4 1.0 60° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Min. Typ.
PAGE 3
Bright Red L-616BHD SPEC NO: DSAD3600 REV NO: V.3 DATE: APR/11/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.