Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesLED indicator light (multi-colour) Red, Yellow Circular 5 mm 60 mcd, 40 mcd 60 ° 20 mA 2 V, 2.1 V

Page 1 / 5

DESCRIPTIONS

z The High Efficiency Red source color devices are

made with Gallium Arsenide Phosphide on Gallium

Phosphide Orange Light Emitting Diode

z The Yellow source color devices are made with

Gallium Arsenide Phosphide on Gallium Phosphide

Yellow Light Emitting Diode

FEATURES

z Uniform light output

z Low power consumption

z 3 leads with one common lead

z Long life-solid state reliability

z RoHS compliant

APPLICATIONS

z Status indicator

z Illuminator

z Signage applications

z Decorative and entertainment lighting

z Commercial and residential architectural lighting

PACKAGE DIMENSIONS

L-59EYW

T-1 3/4 (5mm) Bi-Color Indicator Lamp

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. The specifications, characteristics and technical data described in the datasheet are subject to change

without prior notice.

SELECTION GUIDE

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous flux: +/-15%.

* Luminous intensity value is traceable to CIE127-2007 standards.

Part Number

Emitting Color

(Material)

Lens Type

Iv (mcd) @ 20mA

[2]

Viewing Angle

[1]

Min. Typ. 2θ1/2

L-59EYW

■ High Efficiency Red

(GaAsP/GaP)

White Diffused

30 60

30°

■ Yellow (GaAsP/GaP)

20 40

*20 *40

Kingbright

Summary of content (5 pages)

PAGE 1
L-59EYW T-1 3/4 (5mm) Bi-Color Indicator Lamp DESCRIPTIONS z z PACKAGE DIMENSIONS The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode FEATURES z z z z z Uniform light output Low power consumption 3 leads with one common lead Long life-solid state reliability RoHS compliant APPLICATIONS z z z z z Sta
PAGE 2
L-59EYW ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Emitting Color λpeak Value Unit Typ. Max. High Efficiency Red Yellow 627 590 - nm λdom [1] High Efficiency Red Yellow 617 588 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ High Efficiency Red Yellow 45 35 - nm Capacitance C High Efficiency Red Yellow 15 20 - pF Forward Voltage IF = 20mA VF [2] High Efficiency Red Yellow 2 2.1 2.5 2.
PAGE 3
L-59EYW TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH Yellow Relative Intensity (a. u.) 100% Red 80% 0° -15° Ta = 25 °C Ta = 25 °C -30° 15° 30° -45° 45° 60% 60° -60° 40% 20% 75° -75° 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 800 -90° 1.0 0.0 0.5 90° 1.0 0.5 HIGH EFFICIENCY RED 30 20 10 1.7 1.9 2.1 2.3 Forward voltage (V) 0.5 g in 10 20 30 40 Forward current (mA) 30 20 10 0 50 Luminous intensity normalised at 20mA 40 30 20 10 2.
PAGE 4
L-59EYW PACKING & LABEL SPECIFICATIONS t h g i r b PRECAUTIONS Storage conditions 1. Avoid continued exposure to the condensing moisture environment and keep the product away from rapid transitions in ambient temperature. 2. LEDs should be stored with temperature ≤ 30°C and relative humidity < 60%. 3. Product in the original sealed package is recommended to be assembled within 72 hours of opening. Product in opened package for more than a week should be baked for 30 (+10/-0) hours at 85 ~ 100°C.
PAGE 5
L-59EYW Lead Forming Procedures 1. Do not bend the leads more than twice. (Fig. 6 ) 2. During soldering, component covers and holders should leave clearance to avoid placing damaging stress on the LED during soldering. (Fig. 7) 3. The tip of the soldering iron should never touch the lens epoxy. 4. Through-hole LEDs are incompatible with reflow soldering. 5.