Datasheet

SPEC NO: DSAA4041 REV NO: V.12 DATE: NOV/14/2005 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.K.ZHANG

Package Dimensions

Features



UNIFORM LIGHT OUTPUT.



LOW POWER CONSUMPTION.



3 LEADS WITH ONE COMMON LEAD.



I.C. COMPATIBLE.



LONG LIFE-SOLID STATE RELIABILITY.



RoHS COMPLIANT.

T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP

Description

The High Efficiency Red source color devices are

made With Gallium Arsenide Phosphide on Gallium

Phosphide Orange Light Emitting Diode.

The Green source color devices are made with Gallium

Phosphide Green Light Emitting Diode.

P/N: L-59EGW HIGH EFFICIENCY RED

GREEN

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

PAGE 1
T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP P/N: L-59EGW Features HIGH EFFICIENCY RED GREEN Description UNIFORM LIGHT OUTPUT. The High Efficiency Red source color devices are LOW POWER CONSUMPTION. made With Gallium Arsenide Phosphide on Gallium 3 LEADS WITH ONE COMMON LEAD. Phosphide Orange Light Emitting Diode. I.C. COMPATIBLE. The Green source color devices are made with Gallium LONG LIFE-SOLID STATE RELIABILITY. Phosphide Green Light Emitting Diode. RoHS COMPLIANT.
PAGE 2
Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type Min. Typ. 18 60 18 50 HIGH EFFICIENCY RED (GaAsP/GaP) L-59EGW Viewing Angle WHITE DIFFUSED GREEN (GaP) 2 θ 1/2 60° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Green λD Dominant Wavelength ∆λ1/2 Max.
PAGE 3
High Efficiency Red / Green L-59EGW Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA4041 REV NO: V.12 DATE: NOV/14/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.K.