Datasheet

SPEC NO: DSAB5285 REV NO: V.5 DATE: NOV/15/2005 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI

Description

The Yellow source color devices are made with Gallium

Arsenide Phosphide on Gallium Phosphide Yellow Light

Emitting Diode.

P/N: L-56BYD YELLOW

Package Dimensions

-1 3/4 (5mm) BLINKING LED LAMP

Features



T-1 3/4 PACKAGE .



WITH BUILT-IN BLINKING IC.



OPERATION VOLTAGE FROM 3.5V TO 14V.



BLINKING FREQUENCY FROM 3.0Hz TO 1.5Hz.



RoHS COMPLIANT.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

PAGE 1
T-1 3/4 (5mm) BLINKING LED LAMP P/N: L-56BYD Features YELLOW Description T-1 3/4 PACKAGE . The Yellow source color devices are made with Gallium WITH BUILT-IN BLINKING IC. Arsenide Phosphide on Gallium Phosphide Yellow Light OPERATION VOLTAGE FROM 3.5V TO 14V. Emitting Diode. BLINKING FREQUENCY FROM 3.0Hz TO 1.5Hz. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.
PAGE 2
Selection Guide Part No. Dice L-56BYD Iv (mcd) V=9V Lens Type YELLOW (GaAsP/GaP) Viewing Angle Min. Typ. 2 θ 1/2 5 20 60° YELLOW DIFFUSED Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Min.
PAGE 3
Yellow L-56BYD SPEC NO: DSAB5285 REV NO: V.5 DATE: NOV/15/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.