Datasheet

SPEC NO: DSAA8452 REV NO: V.3 DATE: AUG/26/2004 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ± 0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the lead emerge package.

4. Specifications are subject to change without notice.

L-53SURC HYPER RED

Description

The Hyper Red source color devices are made

with DH InGaAlP on GaAs substrate Light Emitting Diode.

-1 3/4 (5mm) SOLID STATE LAMP

Features



LOW POWER CONSUMPTION.



POPULAR T-1 3/4 DIAMETER PACKAGE.



GENERAL PURPOSE LEADS.



RELIABLE AND RUGGED.



LONG LIFE - SOLID STATE RELIABILITY.



AVAILABLE ON TAPE AND REEL.

Package Dimensions

PAGE 1
T-1 3/4 (5mm) SOLID STATE LAMP L-53SURC Features HYPER RED Description LOW POWER CONSUMPTION. The Hyper Red source color devices are made POPULAR T-1 3/4 DIAMETER PACKAGE. with DH InGaAlP on GaAs substrate Light Emitting Diode. GENERAL PURPOSE LEADS. RELIABLE AND RUGGED. LONG LIFE - SOLID STATE RELIABILITY. AVAILABLE ON TAPE AND REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.
PAGE 2
Selection Guide Part No. Dice L-53SURC Iv (mcd) @ 20mA Lens Type HYPER RED (InGaAlP) WATER CLEAR Viewing Angle Min. Typ. 2θ θ1/2 1200 1400 30° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red λD Dominate Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Hyper Red L-53SURC SPEC NO: DSAA8452 REV NO: V.3 DATE: AUG/26/2004 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.