Datasheet

SPEC NO: DSAA9012 REV NO: V.3 DATE: DEC/18/2004 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at T
A=25°C
Symbol Parameter Device Min. Typ.
Max.
..
.
Units Test Conditions
λpeak
Peak Wavelength Bright Red 700 nm
λD
Dominant Wavelength Bright Red 660 nm
∆λ1/2
Spectral Line Half-width Bright Red 45 nm
IF Forward Current Bright Red 8 22 mA
Min:VF=3.5V
Typ:V
F=5V
ISON Supply Current Bright Red 8 mA VF = 3.5V
ISON Supply Current Bright Red 44 mA VF = 14V
f Blink Frequency Bright Red 1.5 3 Hz VF = 3.5V~14V
Parameter Bright Red Units
Power dissipation 310 mW
Forward Voltage 14 V
Reverse Voltage 0.5 V
Operating Temperature -40°C To +70°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 5 Seconds
Part No. Dice Lens Type
Iv (mcd)
V=9V
Viewing
Angle
Min. Typ.
2 θ
θ θ
θ 1/2
L-36BHD BRIGHT RED (GaP) RED DIFFUSED
1 2
60°
Notes:
1. 2mm below package base.
2. 5mm below package base.