Datasheet

2-L13-1
Package Deminions
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emer-
ge package.
4. Specifications are subjected to change without notice.
Kingbright
®
Features
lMOUNTS FLUSH WITH PANEL.
lLOW POWER CONSUMPTION.
lSUITABLE FOR AUDIO PANEL INDICATOR.
lFITS 2mm HOLE IN PANEL UP TO 3.5mm (.138").
lLONG LIFE - SOLID STATE RELIABILITY.
Description
The Bright Red source color devices are made with Gallium Phosphide
Red Light Emitting Diode.
The Green source color devices are made with Gallium Phosphide Green
Light Emitting Diode.
The High Efficiency Red source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.
The yellow source color devices are made with Gallium Arsenide
Phosphide on Gallium Phosphide Yellow Light Emitting Diode.
Selection Guide
2mm FLAT TOP LED LAMPS
L-13H BRIGHT RED L-13G GREEN
L-13I HIGH EFFICIENCY RED L-13Y YELLOW
Part No. Dice Lens Type
Iv (mcd)
@ 10 mA
Viewing
Angle
Min. Max.
2θ1/2
L-13HD BRIGHT RED (GaP) RED DIFFUSED 0.5 2 70°
L-13ID HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED 5 12.5 70°
L-13GD GREEN (GaP) GREEN DIFFUSED 3.2 12.5 70°
L-13YD YELLOW (GaAsP/GaP) YELLOW DIFFUSED 3.2 12.5 70°