Datasheet

SPEC NO: DSAB2485 REV NO: V.5 DATE: MAR/22/2005 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI

3.65x6.15mm SINGLE CHIP LED LIGHT BAR

Features



FLAT RECTANGULAR LIGHT EMITTING SURFACE.



SINGLE COLOR.



IDEAL AS FLUSH MOUNTED PANEL INDICATORS.



EXCELLENT ON/OFF CONTRAST.



LONG LIFE - SOLID STATE RELIABILITY.



THIS SERIES ARE TIN-DIPPED.



RoHS COMPLIANT.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

Description

The Yellow source color devices are made

with Gallium Arsenide Phosphide on Gallium

Phosphide Yellow Light Emitting Diode.

L-1043YD YELLOW

PAGE 1
3.65x6.15mm SINGLE CHIP LED LIGHT BAR L-1043YD YELLOW Description Features FLAT RECTANGULAR LIGHT EMITTING SURFACE. The Yellow source color devices are m ade SINGLE COLOR. with Gallium Arsenide Phosphide on Gallium IDEAL AS FLUSH MOUNTED PANEL INDICATORS. Phosphide Yellow Light Emitting Diode. EXCELLENT ON/OFF CONTRAST. LONG LIFE - SOLID STATE RELIABILITY. THIS SERIES ARE TIN-DIPPED. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.
PAGE 2
Selection Guide Part No. Dice L-1043YD Iv (mcd) @ 10mA Lens Type YELLOW (GaAsP/GaP) YELLOW DIFFUSED Viewing Angle Min. Typ. 2 θ 1/2 1 4 100° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Yellow λD Dominant Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Yellow L-1043YD Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB2485 REV NO: V.5 DATE: MAR/22/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.