Datasheet

SPEC NO: DSAA8174 REV NO: V.8 DATE: MAR/22/2005 PAGE: 1 OF 3

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI

3.65x6.15mm SINGLE CHIP LED LIGHT BAR

Features



FLAT RECTANGULAR LIGHT EMITTING SURFACE.



SINGLE COLOR.



IDEAL AS FLUSH MOUNTED PANEL INDICATORS.



EXCELLENT ON/OFF CONTRAST.



LONG LIFE - SOLID STATE RELIABILITY.



THIS SERIES ARE TIN-DIPPED.



RoHS COMPLIANT.

Package Dimensions

Description

The High Efficiency Red source color devices are made with

Gallium Arsenide Phosphide on Gallium Phosphide Orange

Light Emitting Diode.

L-1043ID HIGH EFFICIENCY RED

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

PAGE 1
3.65x6.15mm SINGLE CHIP LED LIGHT BAR L-1043ID HIGH EFFICIENCY RED Description Features FLAT RECTANGULAR LIGHT EMITTING SURFACE. The High Efficiency Red source color devices are made with SINGLE COLOR. Gallium Arsenide Phosphide on Gallium Phosphide Orange IDEAL AS FLUSH MOUNTED PANEL INDICATORS. Light Emitting Diode. EXCELLENT ON/OFF CONTRAST. LONG LIFE - SOLID STATE RELIABILITY. THIS SERIES ARE TIN-DIPPED. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches).
PAGE 2
Selection Guide Part No. Dice L-1043ID Iv (mcd) @ 10mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED Viewing Angle Min. Typ. 2 θ 1/2 1.8 10 100° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Units Test Conditions λpeak Peak Wavelength High Efficiency Red Device Typ. 627 Max.
PAGE 3
High Efficiency Red L-1043ID Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA8174 REV NO: V.