Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesSMD LED 0402 Orange 150 mcd 120 ° 20 mA 2.1 V

SPEC NO: DSAC5619 REV NO: V.13A DATE: FEB/27/2013 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1203001433

1.0X0.5mm SMD CHIP LED LAMP

Part Number: KPHHS-1005SECK

Super Bright Orange

Features

z 1.0mmX0.5mm SMT LED, 0.5mm thickness.

z Low power consumption.

z Wide viewing angle.

z Ideal for backlight and indicator.

z Various colors and lens types available.

z Package: 2000pcs / reel .

z Moisture sensitivity level : level 3.

z RoHS compliant.

Description

The Super Bright Orange device is made with AlGaInP (on

GaAs substrate) light emitting diode chip.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

Summary of content (5 pages)

PAGE 1
.0X0.5mm SMD CHIP LED LAMP Part Number: KPHHS-1005SECK Super Bright Orange Features Description z 1.0mmX0.5mm SMT LED, 0.5mm thickness. The Super Bright Orange device is made with AlGaInP (on z Low power consumption. GaAs substrate) light emitting diode chip. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package: 2000pcs / reel . z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1.
PAGE 2
Selection Guide Part No. Dice Lens Type Super Bright Orange (AlGaInP) KPHHS-1005SECK Water Clear Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 120 220 *80 *150 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
PAGE 3
Super Bright Orange KPHHS-1005SECK SPEC NO: DSAC5619 REV NO: V.13A DATE: FEB/27/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.
PAGE 4
KPHHS-1005SECK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAC5619 REV NO: V.13A DATE: FEB/27/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.
PAGE 5
PACKING & LABEL SPECIFICATIONS KPHHS-1005SECK Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAC5619 REV NO: V.13A DATE: FEB/27/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.