Datasheet

ManualsBrandsKingbright ManualsLEDsSMD LED 640nm 0603 1.8cd 30mA

Page 1 / 4

DESCRIPTIONS

 The Hyper Red device is based on light emitting diode

chip made from AlGaInP

 Electrostatic discharge and power surge could

damage the LEDs

 It is recommended to use a wrist band or

anti-electrostatic glove when handling the LEDs

 All devices, equipments and machineries must be

electrically grounded

FEATURES

 1.6 mm x 0.8 mm SMD LED, 0.65 mm thickness

 Low power consumption

 Wide viewing angle

 Ideal for backlight and indicator

 Package: 4000 pcs / reel

 Moisture sensitivity level: 3

 RoHS compliant

APPLICATIONS

 Backlight

 Status indicator

 Home and smart appliances

 Wearable and portable devices



Healthcare applications

ATTENTION

Observe precautions for handling

electrostatic discharge sensitive devices

PACKAGE DIMENSIONS

SELECTION GUIDE

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous flux: +/-15%.

* Luminous intensity value is traceable to CIE127-2007 standards.

KPHD-1608SECK-J3-PRV

1.6 x 0.8 mm SMD Chip LED Lamp

RECOMMENDED SOLDERING PATTERN

(units : mm; tolerance : ± 0.1)

Part Number

Emitting Color

(Material)

Lens Type

Iv (mcd) @ 20mA

[2]

Viewing Angle

[1]

Min. Typ. 2θ1/2

KPHD-1608SECK-J3-PRV

■ Hyper Red (AlGaInP)

Water Clear

900 1800

*300 *600

100

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.15(0.006") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to

change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

Kingbright

Summary of content (4 pages)

PAGE 1
KPHD-1608SECK-J3-PRV 1.6 x 0.8 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Hyper Red device is based on light emitting diode chip made from AlGaInP Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES t h g i r b g n i K 1.6 mm x 0.8 mm SMD LED, 0.
PAGE 2
KPHD-1608SECK-J3-PRV ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Emitting Color λpeak Value Unit Typ. Max. Hyper Red 640 - nm λdom [1] Hyper Red 625 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Hyper Red 20 - nm Capacitance C Hyper Red 27 - pF VF [2] Hyper Red 2.2 2.
PAGE 3
KPHD-1608SECK-J3-PRV TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH Red 80% 0° 15° 30° -30° -45° 60% 45° 60° -60° 40% 20% 75° -75° 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 800 -90° 1.0 HYPER RED Forward Current vs. Forward Voltage 40 30 20 10 0 1.5 1.7 1.9 2.1 2.3 Forward voltage (V) 2.5 2.5 1.5 1.0 g in 0.5 0.0 0 K 10 20 30 40 Forward current (mA) t h 50 g i r b Ta = 25 °C 2.
PAGE 4
KPHD-1608SECK-J3-PRV PACKING & LABEL SPECIFICATIONS t h g i r b g in K PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3.