Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesSMD LED 0805 Red 80 mcd 110 ° 20 mA 1.95 V

SPEC NO: DSAE6000 REV NO: V.10A DATE: MAR/07/2013 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203003838

2.0x1.25mm SMD CHIP LED LAMP

Part Number: KPHCM-2012SURCK Hyper Red

Features

z 2.0X1.25mm SMT LED,0.5mm max. thickness.

z Low power consumption.

z Wide viewing angle.

z Ideal for backlight and indicator.

z Various colors and lens types available.

z Package : 2000pcs / reel.

z Moisture sensitivity level : level 3.

z RoHS compliant.

Description

The Hyper Red source color devices are made with Al-

GaInP on GaAs substrate Light Emitting Diode.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

Summary of content (5 pages)

PAGE 1
2.0x1.25mm SMD CHIP LED LAMP Part Number: KPHCM-2012SURCK Hyper Red Features Description z 2.0X1.25mm SMT LED,0.5mm max. thickness. The Hyper Red source color devices are made with Al- z Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1.
PAGE 2
Selection Guide Part No. Dice KPHCM-2012SURCK Iv (mcd) [2] @ 20mA Lens Type Hyper Red (AlGaInP) Viewing Angle [1] Min. Typ. 120 230 *40 *80 Water Clear 2θ1/2 110° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ.
PAGE 3
Hyper Red KPHCM-2012SURCK SPEC NO: DSAE6000 REV NO: V.10A DATE: MAR/07/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.
PAGE 4
KPHCM-2012SURCK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAE6000 REV NO: V.10A DATE: MAR/07/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.
PAGE 5
PACKING & LABEL SPECIFICATIONS KPHCM-2012SURCK Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAE6000 REV NO: V.10A DATE: MAR/07/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.