Datasheet

ManualsBrandsKingbright ManualsLEDsSMD LED RGB 3x1.5x1mm 1204

Page 1 / 5

PACKAGE DIMENSIONS

SELECTION GUIDE

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous flux: +/-15%.

3. Luminous intensity value is traceable to CIE127-2007 standards.

KPFA-3011BZ1RGZ1C-A132/F

3.0 x 1.0 mm Right Angle SMD Chip LED Lamp

RECOMMENDED SOLDERING PATTERN

(units : mm; tolerance : ± 0.1)

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.2(0.008") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to

change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

DESCRIPTIONS

z The Blue source color devices are made with InGaN

Light Emitting Diode

z The Hyper Red source color devices are made with

AlGaInP on Si-substrate Light Emitting Diode

z The Green source color devices are made with InGaN

Light Emitting Diode

z Electrostatic discharge and power surge could

damage the LEDs

z It is recommended to use a wrist band or

anti-electrostatic glove when handling the LEDs

z All devices, equipments and machineries must be

electrically grounded

FEATURES

z 3.0 x 1.5 x 1.0 mm right angle SMD LED, 1.0 mm thickness

z Low power consumption

z Wide viewing angle

z Ideal for backlight and indicator

z Package: 2000 pcs / reel

z Moisture sensitivity level: 3

z RoHS compliant

APPLICATIONS

z Backlight

z Status indicator

z Home and smart appliances

z Wearable and portable devices

z Healthcare applications

ATTENTION

Observe precautions for handling

electrostatic discharge sensitive devices

Part Number

Emitting Color

(Material)

Lens

Type

Iv (mcd)

@ 20mA

[2]

Iv (mcd)

[2]

@B:R:G=16.5mA:12.2mA:20mA

Dice Chromaticity

Coordinates

Viewing

Angle

[1]

Min. Typ. Typ. x (Typ.) y (Typ.) 2θ1/2

KPFA-3011BZ1RGZ1C-A132/F

■ Blue (InGaN)

Water

Clear

80 150

1340 0.3 0.3

■ Hyper Red

(AlGaInP)

400 660

■ Green (InGaN)

500 780

150

Summary of content (5 pages)

PAGE 1
KPFA-3011BZ1RGZ1C-A132/F 3.0 x 1.
PAGE 2
KPFA-3011BZ1RGZ1C-A132/F ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Value Blue Hyper Red Green Unit Wavelength at Peak Emission IF = 20mA (typ) λpeak 465 631 520 nm Dominant Wavelength IF = 20mA (typ) λdom [1] 470 624 525 nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA (typ) Δλ 22 20 35 nm Capacitance (typ) C 100 25 100 pF Forward Voltage IF = 20mA (typ) (max) VF [2] 3.3 4.0 2.1 2.5 3.2 4.
PAGE 3
KPFA-3011BZ1RGZ1C-A132/F TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH Blue Green Red Relative Intensity (a. u.) 100% 1.0 Ta = 25 °C 80% Ta = 25 °C B R G 60% 0.5 40% 20% 0% 350 0.0 400 450 500 550 600 Wavelength (nm) 650 700 750 800 -90 -75 -60 -45 -30 -15 0 Angle (°) 15 30 45 60 75 90 BLUE Forward Current vs. Forward Voltage 40 30 20 10 0 2.0 2.4 2.8 3.2 3.
PAGE 4
KPFA-3011BZ1RGZ1C-A132/F TECHNICAL DATA THREE CHIPS ON Forward Current Derating Curve Green Forward Current Derating Curve Red 40 30 20 10 0 50 50 Permissible forward current (mA) 50 Permissible forward current (mA) Permissible forward current (mA) Forward Current Derating Curve Blue 40 30 20 10 0 30 20 10 0 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) -40 -20 0 20 40 60 80 100 Ambient temperature (°C) 40 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) CIE CHROMATICITY DIAGRAM Full c
PAGE 5
KPFA-3011BZ1RGZ1C-A132/F TECHNICAL DATA TAPE SPECIFICATIONS (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1.