Datasheet

SPEC NO: DSAB4968 REV NO: V.8 DATE: NOV/11/2005 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
KP
-3216SRC-PRV
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.