Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesSMD LED 1206 Red 100 mcd 120 ° 20 mA 1.85 V

SPEC NO: DSAB4968 REV NO: V.8 DATE: NOV/11/2005 PAGE: 1 OF 4

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI

3.2x1.6mm SMD CHIP LED LAMP

Features



3.2mmx1.6mm SMT LED, 1.1mm THICKNESS.



LOW POWER CONSUMPTION.



WIDE VIEWING ANGLE.



IDEAL FOR BACKLIGHT AND INDICATOR.



VARIOUS COLORS AND LENS TYPES AVAILABLE.



PACKAGE : 2000PCS / REEL.



RoHS COMPLIANT.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.2(0.008") unless otherwise noted.

3. Specifications are subject to change without notice.

P/N: KP-3216SRC-PRV SUPER BRIGHT RED

Description

The Super Bright Red source color devices are made with

Gallium Aluminum Arsenide Red Light Emitting Diode.

Summary of content (4 pages)

PAGE 1
3.2x1.6mm SMD CHIP LED LAMP P/N: KP-3216SRC-PRV Features SUPER BRIGHT RED Description 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS. The Super Bright Red source color devices are made with LOW POWER CONSUMPTION. Gallium Aluminum Arsenide Red Light Emitting Diode. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.
PAGE 2
Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type KP-3216SRC-PRV SUPER BRIGHT RED (GaAlAs) Viewing Angle Min. Typ. 2 θ 1/2 36 80 120° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Red λD Dominant Wavelength ∆λ1/2 Max.
PAGE 3
Super Bright Red KP-3216SRC-PRV SPEC NO: DSAB4968 REV NO: V.8 DATE: NOV/11/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.
PAGE 4
KP-3216SRC-PRV Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB4968 REV NO: V.8 DATE: NOV/11/2005 APPROVED: J.