Datasheet

ManualsBrandsKingbright ManualsLEDsSMD LED 574nm 1206 70mcd 20mA

SPEC NO: DSAB1394 REV NO: V.13 DATE: JAN/13/2010 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Q.NI ERP: 1203000359

3.2x1.6mm SMD CHIP LED LAMP

Part Number: KP-3216MGC Mega Green

Features

z 3.2mmx1.6mm SMT LED, 1.1mm thickness.

z Low power consumption.

z Wide viewing angle.

z Ideal for backlight and indicator.

z Various colors and lens types available.

z Package : 2000pcs / reel.

z Moisture sensitivity level : level 3.

z RoHS compliant.

Description

The Mega Green source color devices are made with AlGaInP

on GaAs substrate Light Emitting Diode.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.2(0.0079") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4.The device has a single mounting surface. The device must be mounted according to the specifications.

Summary of content (5 pages)

PAGE 1
3.2x1.6mm SMD CHIP LED LAMP Part Number: KP-3216MGC Mega Green Features Description z 3.2mmx1.6mm SMT LED, 1.1mm thickness. The Mega Green source color devices are made with AlGaInP z Low power consumption. on GaAs substrate Light Emitting Diode. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1.
PAGE 2
Selection Guide Part No. Dice KP-3216MGC Iv (mcd) [2] @ 20mA Lens Type Mega Green (AlGaInP) Viewing Angle [1] Min. Typ. 2θ1/2 36 70 120° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Mega Green λD [1] Dominant Wavelength Δλ1/2 Max.
PAGE 3
Mega Green KP-3216MGC SPEC NO: DSAB1394 REV NO: V.13 DATE: JAN/13/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Q.
PAGE 4
KP-3216MGC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAB1394 REV NO: V.13 DATE: JAN/13/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Q.
PAGE 5
PACKING & LABEL SPECIFICATIONS KP-3216MGC SPEC NO: DSAB1394 REV NO: V.13 DATE: JAN/13/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Q.