Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesSMD LED 1206 Red 12 mcd 120 ° 20 mA 2 V

SPEC NO: DSAB4908 REV NO: V.7 DATE: MAR/18/2005 PAGE: 1 OF 4

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG

Package Dimensions

Description

The High Efficiency Red source color devices are

made with Gallium Arsenide Phosphide on Gallium

Phosphide Orange Light Emitting Diode.

KP-3216EC HIGH EFFICIENCY RED

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.2(0.0079") unless otherwise noted.

3. Specifications are subject to change without notice.

3.2x1.6mm SMD CHIP LED LAMP

Features



3.2mmx1.6mm SMT LED, 1.1mm THICKNESS.



LOW POWER CONSUMPTION.



WIDE VIEWING ANGLE.



IDEAL FOR BACKLIGHT AND INDICATOR.



VARIOUS COLORS AND LENS TYPES AVAILABLE.



PACKAGE : 2000PCS / REEL.



RoHS COMPLIANT.

Summary of content (4 pages)

PAGE 1
3.2x1.6mm SMD CHIP LED LAMP KP-3216EC HIGH EFFICIENCY RED Description Features 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS. The High Efficiency Red source color devices are LOW POWER CONSUMPTION. made with Gallium Arsenide Phosphide on Gallium WIDE VIEWING ANGLE. Phosphide Orange Light Emitting Diode. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2.
PAGE 2
Selection Guide Part No. Dice HIGH EFFICIENCY RED (GaAsP/GaP) KP-3216EC Iv (mcd) @ 20mA Lens Type Viewing Angle Min. Typ. 2θ θ1/2 4 12 120° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD Dominant Wavelength ∆λ1/2 Max.
PAGE 3
High Efficiency Red KP-3216EC SPEC NO: DSAB4908 REV NO: V.7 DATE: MAR/18/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.
PAGE 4
KP-3216EC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB4908 REV NO: V.7 DATE: MAR/18/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.