Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesSMD LED 0805 Yellow 8 mcd 120 ° 20 mA 2.1 V

SPEC NO: DSAA5109 REV NO: V.7 DATE: MAR/16/2005 PAGE: 1 OF 4

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG

Package Dimensions

Description

The Yellow source color devices are made with Gallium

Arsenide Phosphide on Gallium Phosphide Yellow Light

Emitting Diode.

KP-2012YC YELLOW

2.0x1.25mm SMD CHIP LED LAMP

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3. Specifications are subject to change without notice.

Features



2.0mmx1.25mm SMT LED,1.1mm THICKNESS.



LOW POWER CONSUMPTION.



WIDE VIEWING ANGLE.



IDEAL FOR BACKLIGHT AND INDICATOR.



VARIOUS COLORS AND LENS TYPES AVAILABLE.



PACKAGE : 2000PCS / REEL.



RoHS COMPLIANT.

Summary of content (4 pages)

PAGE 1
2.0x1.25mm SMD CHIP LED LAMP KP-2012YC Features YELLOW Description 2.0mmx1.25mm SMT LED,1.1mm THICKNESS. The Yellow source color devices are made with Gallium LOW POWER CONSUMPTION. Arsenide Phosphide on Gallium Phosphide Yellow Light WIDE VIEWING ANGLE. Emitting Diode. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.
PAGE 2
Selection Guide Part No. Dice KP-2012YC Iv (mcd) @ 20mA Lens Type YELLOW (GaAsP/GaP) Viewing Angle Min. Typ. 2θ θ1/2 2.6 8 120° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Yellow λD Dominant Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Yellow KP-2012YC SPEC NO: DSAA5109 REV NO: V.7 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.
PAGE 4
KP-2012YC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA5109 REV NO: V.7 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.