Datasheet

SPEC NO: KDA0083 REV NO: V.1 DATE: SEP/07/2001 PAGE: 1 OF 4

APPROVED: J.LU CHECKED: DRAWN: S. H. CHEN

Description

The Hyper Red source color devices are made with DH

InGaAlP on GaAs substrate Light Emitting Diode.

2.0x1.2mm SMD CHIP LED LAMP

KP-2012SURC HYPER RED

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3. Lead spacing is measured where the lead emerge package.

4. Specifications are subject to change without notice.

Features

!2.0mmx1.2mm SMT LED,1.1mm THICKNESS.

!LOW POWER CONSUMPTION.

!WIDE VIEWING ANGLE.

!IDEAL FOR BACKLIGHT AND INDICATOR.

!VARIOUS COLORS AND LENS TYPES AVAILABLE.

!PACKAGE : 2000PCS / REEL.

Package Dimensions

PAGE 1
2.0x1.2mm SMD CHIP LED LAMP KP-2012SURC HYPER RED Features Description !2.0mmx1.2mm SMT LED,1.1mm THICKNESS. The Hyper Red source color devices are made with DH !LOW POWER CONSUMPTION. InGaAlP on GaAs substrate Light Emitting Diode. !WIDE VIEWING ANGLE. !IDEAL FOR BACKLIGHT AND INDICATOR. !VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.
PAGE 2
Selection Guide Par t No . Dic e KP-2012SURC Iv (m c d ) @ 20 m A L en s Ty p e HYPER RED ( InGaAlP ) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 70 150 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Hyper Red λD Dominate Wavelength ∆λ1/2 Ty p . Max .
PAGE 3
Hyper Red KP-2012SURC SPEC NO: KDA0083 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/07/2001 DRAWN: S. H.
PAGE 4
KP-2012SURC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: KDA0083 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/07/2001 DRAWN: S. H.