Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesSMD LED 0805 Red 100 mcd 120 ° 20 mA 1.85 V

SPEC NO: DSAB1451 REV NO: V.7 DATE: MAR/16/2005 PAGE: 1 OF 4

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG

2.0x1.25mm SMD CHIP LED LAMP

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3. Specifications are subject to change without notice.

KP-2012SRC-PRV SUPER BRIGHT RED

Description

The Super Bright Red source color devices are made with

Gallium Aluminum Arsenide Red Light Emitting Diode.

Features



2.0mmx1.25mm SMT LED,1.1mm THICKNESS.



LOW POWER CONSUMPTION.



WIDE VIEWING ANGLE.



IDEAL FOR BACKLIGHT AND INDICATOR.



VARIOUS COLORS AND LENS TYPES AVAILABLE.



PACKAGE : 2000PCS / REEL.



RoHS COMPLIANT.

Summary of content (4 pages)

PAGE 1
2.0x1.25mm SMD CHIP LED LAMP KP-2012SRC-PRV Features SUPER BRIGHT RED Description 2.0mmx1.25mm SMT LED,1.1mm THICKNESS. LOW POWER CONSUMPTION. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.
PAGE 2
Selection Guide Part No. Dice KP-2012SRC-PRV Iv (mcd) @ 20mA Lens Type SUPER BRIGHT RED (GaAIAs) WATER CLEAR Viewing Angle Min. Typ. 2 θ 1/2 36 100 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Super Bright Red λD Dominant Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Super Bright Red KP-2012SRC-PRV SPEC NO: DSAB1451 REV NO: V.7 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.
PAGE 4
KP-2012SRC-PRV Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB1451 REV NO: V.7 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.