Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesSMD LED 0805 Green 15 mcd 120 ° 20 mA 2.2 V

SPEC NO: DSAB1341 REV NO: V.7 DATE: MAR/16/2005 PAGE: 1 OF 4

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG

Package Dimensions

Description

The Super Bright Green source color devices are made

with Gallium Phosphide Green Light Emitting Diode.

KP-2012SGC SUPER BRIGHT GREEN

2.0x1.25mm SMD CHIP LED LAMP

Features



2.0mmx1.25mm SMT LED,1.1mm THICKNESS.



LOW POWER CONSUMPTION.



WIDE VIEWING ANGLE.



IDEAL FOR BACKLIGHT AND INDICATOR.



VARIOUS COLORS AND LENS TYPES AVAILABLE.



PACKAGE : 2000PCS / REEL.



RoHS COMPLIANT.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3. Specifications are subject to change without notice.

Summary of content (4 pages)

PAGE 1
2.0x1.25mm SMD CHIP LED LAMP KP-2012SGC Features SUPER BRIGHT GREEN Description 2.0mmx1.25mm SMT LED,1.1mm THICKNESS. The Super Bright Green source color devices are made LOW POWER CONSUMPTION. with Gallium Phosphide Green Light Emitting Diode. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.
PAGE 2
Selection Guide Part No. Dice KP-2012SGC Iv (mcd) @ 20mA Lens Type SUPER BRIGHT GREEN (GaP) Viewing Angle Min. Typ. 2θ θ1/2 4 15 120° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Green λD Dominant Wavelength ∆λ1/2 Max.
PAGE 3
Super Bright Green KP-2012SGC SPEC NO: DSAB1341 REV NO: V.7 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.
PAGE 4
KP-2012SGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB1341 REV NO: V.7 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.