Datasheet

SPEC NO: DSAF1613 REV NO: V.6 DATE: JUN/08/2006 PAGE: 1 OF 5

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG

Package Dimensions

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

DISCHARGE

SENSITIVE

DEVICE

Part Number: KP-2012PBC-A BLUE

Description

The Blue source colordevices are made with InGaN on SiC

Light Emitting Diode.

Static electricity and surge damage the LEDS.

It is recommended to use a wrist band or anti-electrostatic

glove when handling the LEDs.

All devices, equipment and machinery must be electrically

grounded.

2.0x1.25mm SMD CHIP LED LAMP

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3. Specifications are subject to change without notice.

Features



2.0mmx1.25mm SMT LED,1.1mm THICKNESS.



LOW POWER CONSUMPTION.



WIDE VIEWING ANGLE.



IDEAL FOR BACKLIGHT AND INDICATOR.



VARIOUS COLORS AND LENS TYPES AVAILABLE.



PACKAGE : 2000PCS / REEL.



MOISTURE SENSITIVITY LEVEL : LEVEL 3.



RoHS COMPLIANT.

PAGE 1
2.0x1.25mm SMD CHIP LED LAMP ATTENTION Part Number: KP-2012PBC-A BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description 2.0mmx1.25mm SMT LED,1.1mm THICKNESS. The Blue source colordevices are made with InGaN on SiC LOW POWER CONSUMPTION. Light Emitting Diode. WIDE VIEWING ANGLE. Static electricity and surge damage the LEDS. IDEAL FOR BACKLIGHT AND INDICATOR.
PAGE 2
Selection Guide Part No. Dice KP-2012PBC-A Iv (mcd) [2] @ 20mA Lens Type BLUE (InGaN) Viewing Angle [1] Min. Typ. 2θ θ1/2 18 60 120° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Blue KP-2012PBC-A SPEC NO: DSAF1613 REV NO: V.6 DATE: JUN/08/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.
PAGE 4
KP-2012PBC-A Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1613 REV NO: V.6 DATE: JUN/08/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.
PAGE 5
PACKING & LABEL SPECIFICATIONS KP-2012PBC-A SPEC NO: DSAF1613 REV NO: V.6 DATE: JUN/08/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.