Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesSMD LED 0805 Red 12 mcd 120 ° 20 mA 2 V

SPEC NO: DSAA5826 REV NO: V.9 DATE: MAR/16/2005 PAGE: 1 OF 4

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG

Package Dimensions

KP-2012EC HIGH EFFICIENCY RED

Description

The High Efficiency Red source color devices are made

with Gallium Arsenide Phosphide on Gallium Phosphide

Orange Light Emitting Diode.

2.0x1.25mm SMD CHIP LED LAMP

Features



2.0mmx1.25mm SMT LED,1.1mm THICKNESS.



LOW POWER CONSUMPTION.



WIDE VIEWING ANGLE.



IDEAL FOR BACKLIGHT AND INDICATOR.



VARIOUS COLORS AND LENS TYPES AVAILABLE.



PACKAGE : 2000PCS / REEL.



RoHS COMPLIANT.

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3. Specifications are subject to change without notice.

Summary of content (4 pages)

PAGE 1
2.0x1.25mm SMD CHIP LED LAMP KP-2012EC Features HIGH EFFICIENCY RED Description 2.0mmx1.25mm SMT LED,1.1mm THICKNESS. LOW POWER CONSUMPTION. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide WIDE VIEWING ANGLE. Orange Light Emitting Diode. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2.
PAGE 2
Selection Guide Part No. Dice KP-2012EC Iv (mcd) @ 20mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) WATER CLEAR Viewing Angle Min. Typ. 2 θ 1/2 4 12 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD Dominant Wavelength ∆λ1/2 Max.
PAGE 3
High Efficiency Red KP-2012EC SPEC NO: DSAA5826 REV NO: V.9 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.
PAGE 4
KP-2012EC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA5826 REV NO: V.9 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.