Datasheet

SPEC NO: DSAA1789 REV NO: V.8 DATE: MAR/14/2005 PAGE: 4 OF 4

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI

Recommended Soldering Pattern

(Units : mm)

Tape Specifications

(Units : mm)

-1608SRC-PRV

If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),

the typical accuracy of the sorting process is as follows:

1. Wavelength: +/-1nm

2. Luminous Intensity: +/-15%

3. Forward Voltage: +/-0.1V

Note: Accuracy may depend on the sorting parameters.