Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesSMD LED 0603 Red 100 mcd 120 ° 20 mA 1.85 V

SPEC NO: DSAA1789 REV NO: V.8 DATE: MAR/14/2005 PAGE: 1 OF 4

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI

1.6X0.8mm SMD CHIP LED LAMP

Features



1.6mmX0.8mm SMT LED, 1.1mm THICKNESS.



LOW POWER CONSUMPTION.



WIDE VIEWING ANGLE.



IDEAL FOR BACKLIGHT AND INDICATOR.



VARIOUS COLORS AND LENS TYPES AVAILABLE.



PACKAGE: 2000PCS / REEL .



RoHS COMPLIANT.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3.Specifications are subject to change without notice.

Description

The Super Bright Red source color devices are made with

Gallium Aluminum Arsenide Red Light Emitting Diode.

KP-1608SRC-PRV SUPER BRIGHT RED

Summary of content (4 pages)

PAGE 1
.6X0.8mm SMD CHIP LED LAMP KP-1608SRC-PRV SUPER BRIGHT RED Description Features 1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. The Super Bright Red source color devices are made with LOW POWER CONSUMPTION. Gallium Aluminum Arsenide Red Light Emitting Diode. W IDE VIEW ING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE: 2000PCS / REEL . RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.
PAGE 2
Selection Guide Part No. Dice KP-1608SRC-PRV Iv (mcd) @ 20mA Lens Type SUPER BRIGHT RED (GaAlAs) WATER CLEAR Viewing Angle Min. Typ. 2θ θ1/2 36 100 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Super Bright Red λD Dominant Wavelength ∆λ1/2 Typ. Max.
PAGE 3
Super Bright Red KP-1608SRC-PRV SPEC NO: DSAA1789 REV NO: V.8 DATE: MAR/14/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.
PAGE 4
KP-1608SRC-PRV Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA1789 REV NO: V.8 DATE: MAR/14/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.