Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesSMD LED 0603 Red 12 mcd 120 ° 20 mA 2 V

SPEC NO: DSAA4890 REV NO: V.7 DATE: NOV/04/2005 PAGE: 1 OF 4

APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG

Package Dimensions

1.6X0.8mm SMD CHIP LED LAMP

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3.Specifications are subject to change without notice.

Description

The High Efficiency Red source color devices are made with

Gallium Arsenide Phosphide on Gallium Phosphide Orange

Light Emitting Diode.

P/N: KP-1608EC HIGH EFFICIENCY RED

Features



1.6mmX0.8mm SMT LED, 1.1mm THICKNESS.



LOW POWER CONSUMPTION.



WIDE VIEWING ANGLE.



IDEAL FOR BACKLIGHT AND INDICATOR.



VARIOUS COLORS AND LENS TYPES AVAILABLE.



PACKAGE: 2000PCS / REEL .



RoHS COMPLIANT.

Summary of content (4 pages)

PAGE 1
.6X0.8mm SMD CHIP LED LAMP P/N: KP-1608EC Features HIGH EFFICIENCY RED Description 1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. The High Efficiency Red source color devices are made with LOW POWER CONSUMPTION. Gallium Arsenide Phosphide on Gallium Phosphide Orange W IDE VIEW ING ANGLE. Light Emitting Diode. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE: 2000PCS / REEL . RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2.
PAGE 2
Selection Guide Part No. Dice HIGH EFFICIENCY RED (GaAsP/GaP) KP-1608EC Iv (mcd) @ 20mA Lens Type Viewing Angle Min. Typ. 2θ θ1/2 4 12 120° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD Dominant Wavelength ∆λ1/2 Max.
PAGE 3
High Efficiency Red KP-1608EC SPEC NO: DSAA4890 REV NO: V.7 DATE: NOV/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.
PAGE 4
KP-1608EC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA4890 REV NO: V.7 DATE: NOV/04/2005 APPROVED: J.