Datasheet

ManualsBrandsKingbright ManualsLEDsSMD LED RGB 3.5x 2.8x1.9mm 1411

Page 1 / 5

PACKAGE DIMENSIONS

SELECTION GUIDE

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous flux: +/-15%.

3. Luminous intensity value is traceable to CIE127-2007 standards.

KAA-3528RGBS-K11-C8-CC

3.5 x 2.8 mm Surface Mount LED Lamp

RECOMMENDED SOLDERING PATTERN

(units : mm; tolerance : ± 0.1)

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to

change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

DESCRIPTIONS

 The Hyper Red device is based on light emitting diode

chip made from AlGaInP

 The Green source color devices are made with InGaN

Light Emitting Diode

 The Blue source color devices are made with InGaN

Light Emitting Diode

 Electrostatic discharge and power surge could

damage the LEDs

 It is recommended to use a wrist band or

anti-electrostatic glove when handling the LEDs

 All devices, equipments and machineries must be

electrically grounded

FEATURES

 Suitable for all SMD assembly and solder process

 Available on tape and reel

 Package: 2000 pcs / reel

 Moisture sensitivity level: 3

 RoHS compliant

APPLICATIONS

 Backlight

 Status indicator

 Home and smart appliances

 Wearable and portable devices



Healthcare applications

ATTENTION

Observe precautions for handling

electrostatic discharge sensitive devices

Part Number

Emitting Color

(Material)

Lens Type

Iv (mcd) @ 20mA

[2]

Viewing Angle

[1]

Min. Typ. 2θ1/2

KAA-3528RGBS-K11-C8-CC

■ Hyper Red

(AlGaInP)

Water Clear

400 500

■ Green (InGaN)

1000 1600

■ Blue (InGaN)

200 330

120

Kingbright

Summary of content (5 pages)

PAGE 1
KAA-3528RGBS-K11-C8-CC 3.5 x 2.
PAGE 2
KAA-3528RGBS-K11-C8-CC ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Emitting Color λpeak Value Unit Typ. Max. Hyper Red Green Blue 640 520 465 - nm λdom [1] Hyper Red Green Blue 625 525 470 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Hyper Red Green Blue 20 35 22 - nm Capacitance C Hyper Red Green Blue 27 100 100 - pF VF [2] Hyper Red Green Blue 2.2 3.2 3.3 2.8 4.0 4.
PAGE 3
KAA-3528RGBS-K11-C8-CC TECHNICAL DATA RELATIVE INTENSITY vs. WAVELENGTH Blue Green SPATIAL DISTRIBUTION Red Relative Intensity (a. u.) 100% Ta = 25 °C Ta = 25 °C 80% 0° -15° 15° 30° -30° 45° -45° 60% 60° -60° 40% 20% 75° -75° 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 800 -90° 1.0 0.5 0.0 90° 1.0 0.5 HYPER RED 30 20 10 0 1.5 1.7 1.9 2.1 2.3 Forward voltage (V) 0.
PAGE 4
KAA-3528RGBS-K11-C8-CC TECHNICAL DATA TAPE SPECIFICATIONS (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product.
PAGE 5
KAA-3528RGBS-K11-C8-CC PACKING & LABEL SPECIFICATIONS t h g i r b g in K PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3.