Datasheet

SPEC NO: DSAH9301 REV NO: V.3 DATE: JAN/14/2008 PAGE: 3 OF 5

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.CHEN ERP: 1201002971

Selection Guide

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Notes:

1.Wavelength: +/-1nm.

2. Forward Voltage: +/-0.1V.

Note:

1. 1/10 Duty Cycle, 0.1ms Pulse Width.

Symbol Parameter Device Typ. Max. Units Test Conditions

λpeak Peak Wavelength Super Bright Yellow 590 nm I

F=150mA

λD [1] Dominant Wavelength Super Bright Yellow 590 nm I

F=150mA

Δλ1/2 Spectral Line Half-width Super Bright Yellow 20 nm I

F=150mA

C Capacitance Super Bright Yellow 20 pF V

F=0V;f=1MHz

F [2] Forward Voltage Super Bright Yellow 2.8 3.2 V IF=150mA

R Reverse Current Super Bright Yellow 10 uA VR=5V

Parameter Super Bright Yellow Units

Power dissipation 480 mW

DC Forward Current 150 mA

Peak Forward Current [1] 200 mA

Reverse Voltage 5 V

Operating Temperature -40°C To +85°C

Storage Temperature -40°C To +85°C

Part No.

Dice Lens Type

Iv (mcd) [2]

@ 150mA

iewing

Angle [1]

Min. Typ. Min. Typ.

2θ1/2

KA-3529SYS-L Super Bright Yellow (AlInGaP) WATER CLEAR 1600 3000 3000 6000

120°

Φv (mlm) [2]

@ 150mA

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

2. Luminous intensity / luminous flux: +/-15%.