Datasheet

ManualsBrandsKINGBRIGHT ManualsLEDs & AccessoriesSMD LED PLCC2 Yellow 3000 mcd 120 ° 150 mA 2.8 V

SPEC NO: DSAH9301 REV NO: V.3 DATE: JAN/14/2008 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.CHEN ERP: 1201002971

3.5x2.8 mm SMD CHIP LED LAMP

PRELIMINARY SPEC

Part Number: KA-3529SYS-L

Super Bright Yellow

Features

zSINGLE COLOR.

zSUITABLE FOR ALL SMT ASSEMBLY AND SOLDER

PROCESS.

zAVAILABLE ON TAPE AND REEL.

zIDEAL FOR BACKLIGHTING.

zWHITE SMD PACKAGE, SILICONE RESIN.

zLOW THERMAL RESISTANCE.

zPACKAGE: 1500PCS / REEL.

zMOISTURE SENSITIVITY LEVEL : LEVEL 2a.

zRoHS COMPLIANT.

Description

The source color devices are made with AlInGaP Light

Emitting Diode.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Specifications are subject to change without notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

Summary of content (5 pages)

PAGE 1
3.5x2.8 mm SMD CHIP LED LAMP Part Number: KA-3529SYS-L PRELIMINARY SPEC Super Bright Yellow Features Description zSINGLE COLOR. The source color devices are made with AlInGaP Light zSUITABLE FOR ALL SMT ASSEMBLY AND SOLDER Emitting Diode. PROCESS. zAVAILABLE ON TAPE AND REEL. zIDEAL FOR BACKLIGHTING. zWHITE SMD PACKAGE, SILICONE RESIN. zLOW THERMAL RESISTANCE. zPACKAGE: 1500PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 2a. zRoHS COMPLIANT. Package Dimensions Notes: 1.
PAGE 2
Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1.
PAGE 3
Selection Guide Dice Part No. KA-3529SYS-L Iv (mcd) [2] @ 150mA Lens Type Super Bright Yellow (AlInGaP) WATER CLEAR Φv (mlm) [2] @ 150mA Viewing Angle [1] Min. Typ. Min. Typ. 2θ1/2 1600 3000 3000 6000 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ.
PAGE 4
Super Bright Yellow KA-3529SYS-L SPEC NO: DSAH9301 REV NO: V.3 DATE: JAN/14/2008 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.
PAGE 5
KA-3529SYS-L Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH9301 REV NO: V.3 DATE: JAN/14/2008 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.