Datasheet

ManualsBrandsKingbright ManualsLEDsSMD LED 590nm PLCC-2 150mcd 20mA

SPEC NO: DSAK9851 REV NO: V.2 DATE: MAR/05/2011 PAGE: 1 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201006689

3.5x2.8mm SURFACE MOUNT LED LAMP

Part Number: KA-3528SYSK Super Bright Yellow

Features

z Single color.

z Suitable for all SMT assembly and solder process.

z Available on tape and reel.

z Ideal for backlighting.

z Package : 1500pcs / reel.

z Moisture sensitivity level : level 3.

z RoHS compliant.

Description

The Super Bright Yellow device is made with AlGaInP (on

GaAs substrate) light emitting diode chip.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4.The device has a single mounting surface. The device must be mounted according to the specifications.

Summary of content (6 pages)

PAGE 1
3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: KA-3528SYSK Super Bright Yellow Features Description z Single color. The Super Bright Yellow device is made with AlGaInP (on z Suitable for all SMT assembly and solder process. GaAs substrate) light emitting diode chip. z Available on tape and reel. z Ideal for backlighting. z Package : 1500pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.
PAGE 2
Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1.
PAGE 3
Selection Guide Part No. Dice KA-3528SYSK Lens Type Super Bright Yellow (AlGaInP) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 80 200 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max.
PAGE 4
Super Bright Yellow KA-3528SYSK SPEC NO: DSAK9851 REV NO: V.2 DATE: MAR/05/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.
PAGE 5
KA-3528SYSK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAK9851 REV NO: V.2 DATE: MAR/05/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.
PAGE 6
PACKING & LABEL SPECIFICATIONS KA-3528SYSK SPEC NO: DSAK9851 REV NO: V.2 DATE: MAR/05/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.