Datasheet

SPEC NO: DSAB5493 REV NO: V.5 DATE: APR/19/2007 PAGE: 2 OF 3
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU
Selection Guide
Electrical / Optical Characteristics at T
A=25°C
Absolute Maximum Ratings at T
A=25°C
Part No.
Dice Lens Type
Iv (mcd) [2]
V= 5V
V
iewing
Angle [1]
Min. Typ.
2θ1/2
L-934ID-5V HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED 8 20
60°
Notes:
1. 2mm below package base.
2. 5mm below package base.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak
Peak Wavelength High Efficiency Red 627 nm VF=5V
λD[1]
Dominant Wavelength High Efficiency Red 625 nm VF=5V
Δλ1/2
Spectral Line Half-width High Efficiency Red 45 nm VF=5V
I
F
Forward Current High Efficiency Red 13 17.5 mA VF=5V
I
R
Reverse Current High Efficiency Red 10 uA VR= 5V
Parameter High Efficiency Red Units
Power dissipation 85 mW
Forward Voltage 6 V
Reverse Voltage 5 V
Operating Temperature
Storage Temperature -40°C To +85°C
Lead Solder Temperature[1] 260°C For 3 Seconds
-40°C To +70°C
Lead Solder Temperature[2] 260°C For 5 Seconds
Notes:
1.
θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity / luminous flux: +/-15%.
Note:
1.Wavelength: +/-1nm.