User Manual
Page 2
1 INTRODUCTION
Thank you for purchasing a KING antenna!
This KING Quest is specically designed to work with the DIRECTV 101 satellite for SD programming
and nationwide distant network local channels found on the 101 satellite. Other local area channels
are broadcast from either the 101 or 119 satellites via spot beam transponders and have limited
availability outside your immediate local area. If your local channels are broadcast from the 119
satellite, an optional universal controller (KING #UC1000 – sold separately) is required which allows
the antenna to automatically switch between the 101 and 119 satellites to receive those channels.
LEGACY RECEIVERS
The KING Quest is compatible with a variety of DIRECTV legacy receivers including Models D10,
D11, D12, H20, H21, H22, H23, H24, HR20, HR21, HR22, HR23 and HR24.
The connection diagram on page 4 shows how to use your KING Quest with the included Power
Injector to receive programming from satellite 101.
To nd out more about the KING UC1000 controller which allows you to receive programming from
satellite 119 as well as the 101, contact KING or your local dealer.
SWM ONLY RECEIVERS
SWM only receivers such as H25 and higher models are only compatible with the 101 satellite and
require additional SWM hardware which is sold separately (see page 6).
Unbox your KING Quest and verify all components are present.
NOTE: The KING Quest may be used as a portable satellite antenna or as a roof mounted antenna (see section 7 for
roof installation instructions).