Use and Care Manual

Page 26
13 TROUBLESHOOTING
14 SECURITY FEATURE
SYMPTOM POSSIBLE CAUSE COURSE OF ACTION
Antenna unit does not scan
for satellites.
No power to antenna unit. Make sure antenna unit is connected to controller.
Make sure controller is powered (LED will be lit).
Antenna unit scans but no
picture on TV.
Improper connections made. Make sure antenna unit is connected to controller,
and controller is plugged in.
Make sure powered receiver is connected to
controller and TV.
Antenna unit scans but does
not nd satellite.
Line of sight obstruction. Move antenna unit to have a clear view of the
southern sky. Press SCAN to start a new scan.
Picture on TV goes in and out. Temporary obstruction of signal. Heavy rain or snow may cause loss of signal.
Reception will improve as weather clears.
Make sure nothing is temporarily blocking view to
the southern sky (even tree branches swaying in the
wind may cause temporary interruptions of signal).
The KING Quest can be secured to an object
using a cable looped thru the handle.