User Manual

Page 1
1. Turn on TV and power injector.
2. Turn on KING SureLock Signal Meter with switch on side of enclosure.
3. Press button and turn knob to rotate antenna in
one direction until it hits the stop.
4. Rotate attenuator dial fully clockwise.
5. Rotate antenna a full 360 degrees.
Antenna will hit stop again.
As you rotate it, note where the maximum
number of LEDs illuminate on signal meter.
Rotate the antenna back to where the most
LEDs illuminated.
6. Rotate attenuator dial counter clockwise until last illuminated LED ickers.
7. Rotate antenna back and forth slightly to illuminate ickering LED.
8. Repeat steps 6 and 7 to pinpoint signal reception.
9. Follow instructions in TV or converter box owner’s manual to scan for available channels. Watch TV!
Arrow on knob indicates which direction
antenna is pointing.
LEDs will illuminate from left
(next to power) to right.
All LEDs may not illuminate depending
on signal strength.
OPERATION
AIMING THE ANTENNA