Product Manual
Page 4
3. Assemble the MB700.
4. Open the latching mechanism (see opposite page).
Mount the MB700 using the (9) mounting holes. Make sure to seal mounting holes and cover
fastener heads with roof-compatible sealant.
IMPORTANT! The installer is responsible for determining and supplying the most appropriate fasteners to
secure the MB700 to the roof, and for weatherprooîżng all holes with roof-compatible sealant.
All holes and fastener heads must be sealed so they are completely waterproof.
Press the (4) stringers into place and fasten
with (4) included screws.
Press the two sets of stringers together.
IMPORTANT!
You must weatherproof
all holes and fastener
heads with roof-
compatible sealant.