User manual

5
Electronic Programmer
The electronic timer can indicate the time
of day, operate as a minute minder and
automatically operate the oven.
Before the oven can be operated, the time
of day must be set on the electronic timer.
Please note that this is a 24 hour clock. For
example, 2pm is shown as 14:00.
To set the time of the day
Press buttons and , and at the same
time turn the time setting knob until the
correct time of day is displayed.
To set the Minute Minder
Press button and at the same time turn
the setting time knob until the duration time
is displayed (maximum 23 hours, 59
minutes).
Our diagram shows the timer set for 35
minutes. After a few seconds the time of
day will show in the display.
To check the number of minutes remaining,
press the button. At the end of the timed
period an alarm will sound. To switch off the
alarm press button .
Minute minder
Cooking duration
End of cooking time
Manual function
Cookpot symbol - This will be
displayed when a program is in
operation.
Auto symbol - This will be displayed
when the oven has been programmed
for automatic operation.
- + Time setting knob
- +
A
U
T
O
A
U
T
O
Time
setting
Cookpot symbol
Programming controls
Auto
symbol
- +
A
U
T
O
- +
In case of loss of power, all the settings
(time of day, set program or program in
operation), will be cancelled. When the
power is restored, the numbers on the
display will flash, and the timer has to be
reset.
Child safety
function Symbol