User Guide

B. With In-floor Cleaners
A. With High GPMS
Install T-fittings exactly as shown.
C. Pool and Spillover Spa Combination
TO POOL
TO SPA
3-WAY
CHECK VALVE
PUMP
TO POOL
POOL FROG
XL PRO
SUCTION
FROM
POOL/SPA
CHECK
VALVE
For Proper Performance
➜
➜
➜
➜
➜➜
➜
➜
➜
➜
➜
➜
➜
➜
➜
➜
➜
➜
PUMP
3-way manual
valve or 3-way
motor valve
control
POOL FROG
XL PRO
POOL FROG
XL PRO
NOTE: The best
option is to have a
separate pump for
the in-floor cleaning
system.
SUCTION
FROM
POOL/SPA
1) Recommended flow rates for in
ground unit is 20-80 gpm.
2) On pools with recommended flow
rates make sure back pressure Is
between 3 and 8 psi.
Higher back pressures could result in over
chlorination. Lower back pressures could
result in under chlorination. Adjust eye
ball fittings in the return jets to a larger
size to decrease back pressure or smaller
size to increase back pressure. Contact
your dealer to have your back pressure
tested to ensure it is between 3 and 8 psi.
3) Possible high-flow situations that
require a special installation such as:
A. Water flow is higher than 80 gpm.
B. In-floor cleaner is included with pool.
C. Pool and spa combination with
common equipment.
NOTE: Over chlorination or damage to the
POOL FROG
®
XL PRO Cyclers or other
equipment could result if these special
installations are not used in these situations.
In-floor
valve
POOL WATER LEVEL
15