User Guide

Limited One-Year Warranty
King Technology, Inc. will warrant this unit with a complete
replacement for the original purchaser, should it prove
defective by reason of improper workmanship and/or material,
for a period of one (1) year from the date of original purchase.
King Technology holds the option of replacing any defective
part without charge if it is determined to be all that is needed
to correct any situation that may arise. Parts used for
replacement are warranted for the remainder of the original
warranty.
1. To obtain warranty service, you must deliver product
to King Technology or its nearest authorized dealer.
Shipping expenses are the purchaser's responsibility.
The name of the nearest authorized dealer can be
obtained by writing or calling King Technology at the
address and telephone number provided below. Proof
of purchase is required when requesting warranty
service. Purchaser must present the sales receipt or
other document which establishes proof of purchase.
To validate your warranty, complete the warranty card
that came with your unit and return it to King Technology
within 30 days of purchase and installation.
2. This warranty does not cover defects caused by:
Modification, alteration, repair or service of the product
contrary to the accompanying instructions; physical
abuse to or misuse of the product or operation or
installation in a manner contrary to the accompanying
instructions. This warranty also excludes all costs
arising from the warranty and any and all claims arising
out of the chemicals used in the product or their
characteristics.
3. CAUTION - Read carefully - Do not add shock in or
near skimmer.
A. This unit is not designed for shock treatment of
spas or pools. See your spa or pool dealer or distributor
for further information concerning shock treatments.
B. Control dial settings higher than needed can result
in excess sanitizers being discharged into the pool. If the
sanitizer level goes unmonitored, it can result in bleaching
or discoloration of areas around the pool inlet or in some
cases bleaching or discoloration of the entire pool liner
or paint.
C. Excess trichlor or bromine in the spa or pool can
create health hazards to bathers. Consult each chemical
manufacturer's warnings and cautions for specifics.
4. Any express warranty not provided for herein, and any
remedy for breach of warranty or breach of contract which,
but for this provision, might arise by implication or operation
of law, is hereby expressly excluded and disclaimed. Any
express warranty not provided herein, and any remedy
for breach of contract but which for this provision might
arise by implication or operation of law, is hereby excluded
and disclaimed. The implied warranties of merchantability
and of fitness for any particular purpose are expressly
limited to a term of one year. Some states do not allow
limitation on how long an implied warranty lasts, so the
above limitation may not apply to you.
5. Under no circumstance shall King Technology be liable
to purchaser or any other person for any damage or loss
incurred because of any chemicals used in the product or
their physical characteristics, or interruption of service of
the product, or any special, incidental or consequential
damages or losses, whether arising out of breach of
warranty, breach of contract or otherwise. Some states do
not allow the exclusion or limitation of incidental
consequential damages, so the above limitation or exclusion
may not apply to you.
Manufactured by: KING TECHNOLOGY, INC.
530 11th Avenue South, Hopkins, MN 55343 U.S.A. [phone] • FAX [phone]
553100643R2N
www.kingtechnology.com
Made in U.S.A.
U.S. Patent Number 4,662,387
and other U.S. and Foreign Patents Pending
PN #20-48-0118
23