User Guide

Above Ground, Filter Installation - Model 100
Apply teflon tape to each
threaded end of nipple.
Screw one end of nipple
into the filter return.
Screw either side of
Cycler on to open nipple
end until upright and
secure.
Tighten turning
1 to 2 revolutions with wrench.
DO NOT OVER TIGHTEN.
7
Tighten turning
1 to 2 revolutions
with wrench. DO NOT
OVER TIGHTEN.
HOSE ADAPTER
4.
5.
6.
1.
2.
3.
7.
MATERIALS NEEDED
One
Hose
Clamp
Corrosion Resistant
Check Valve
RECOMMENDED
Apply teflon tape to
threaded end of hose
adapter.
Screw adapter into
open end of Cycler.
Attach return section of hose
to the adapter with clamp.
Tighten clamp with
screwdriver.
TOOLS NEEDED
Screwdriver
Installing a corrosion resistant
check valve is recommended.
Teflon Tape
One Hose Adapter
1 1/2" X 1 1/2" X 1 1/4"
One 6" X 1 1/2" TBE
PVC Nipple
One Section of
1 1/2" Flex Hose
(provided with filter)
Wrench