User Guide

N
e
w
W
a
t
e
r
Winterizing
1. Turn dial to minimum. Turn
pump off . Unscrew side knob
of Model 100 to relieve
pressure.
2. Remove cap.
6. If Pac still contains chlorine
wrap in plastic bag and store
in shed or garage away from
children and pets.
3. Unscrew drain valve in
back of Cycler #400 or from
the front of Cycler #100. Allow
all water to drain.
4. Remove Pac.
• To replace, simply unscrew old knob
and replace with the new one.
1. Hold cap in front of you
upside down with the o-ring
groove facing up. Place one end
of o-ring into cap groove at the
point closest to you. Hold o-ring
down with the thumb and
forefinger of one hand.
2. Take hold of the far end of
the o-ring with the thumb and
index finger of the other hand.
Roll o-ring slightly back towards
you as you stretch the o-ring into
the remainder of the cap groove.
• Front of 100 Cycler
• Side of 100 Cycler
7. Make sure Pac is away
from open flame or anything
metal.
®
3. Lubricate o-ring often with
silicone lubricant that came with
your Cycler. DO NOT USE
petroleum based lubricants.
C
O
P
Y
C
O
P
Y
C
O
P
Y
C
O
P
Y
O
T
H
E
R
C
O
P
Y
?
S
I
L
I
C
O
N
E
L
U
B
R
I
C
A
N
T
Replacing Cap O-rings
Replacing Knobs
5. Replace the cap and knobs
loosely.
15
• Back of 400 Cycler