Product Manual

The feeding of the disc is by gravity through an opening located at the bottom of the
hopper, inside of which a mix/agitator is applied, in order to prevent formation of
lumps in the fertilizer. A plate is put in front of the disc to prevent the spreading to
the front side of the machine.
The fertilizer delivery is controlled by properly opening the shutters in the hopper
bottom, through locking devices operated by levers. The fertilizer spreader and the
agitator are connected through a gearbox with the wheels, so the speed of the disc
is proportionate to the speed of the machine. The switching off and on of the
spreading disc is made by putting or removing the split pin on the axle. The machine
is connected with a ball hitch 1-7/8”.
7
The hardness of the steel welded frame, together with the remarkable life of the hop-
per, helps to obtain a highest quality level of the pull type spreaders. The painting is
made by an epoxy varnish with successive backing at 150 degrees Celsius with the
application of the primer bath, assuring great protection and long life of the machine.