Product Manual

15
PULL TYPE SPREADER USE
ATTENTION! - Before use, please check that zerks are
adequately greased (see page 21).
ATTENTION! - During the use of the spreader, please be sure
there are not any persons or animals within 50 meters (165 Ft.).
If someone comes up please stop immediately.
Recommendations for correct distribution
- Please always test lbs/acre you want to spread before starting to work.
- Use a fertilizer or seeds in perfect condition: a humid fertilizer cannot be spread uni-
formly and correctly.
- Avoid spreading fertilizer or seeds on windy days, in order to improve the uniformity
of the distribution.
Connections
The pull type spreader can be hitched to every type of tractor or atv with 1-7/8” ball
hitch providing it has the horsepower to pull it . To make the connection, it is neces-
sary to put the ball hitch in the coupler on the pull type spreader, locking it pushing
the lock handle towards the bottom. Check and regulate the length of the regulation
tongue rod, so that the spreader disc is, as parallel as possible, to the ground in order
to get a uniform distribution of the fertilizer or seed. Unscrew the locking bolt, as
shown with the arrow in the picture below and move the rod to the position making
unit parallel and lock the bolt in the new position.
Locking Bolt
Shaft Regulation Bar Correct position of the spreading disc.