Product Manual

MAINTENANCE

1). Periodically check and maintain proper gear oil level.

2). Every 8 hours, grease spindles (3), roller axle (1), wheel forks (4), wheel axles

(4), PTO shaft universal joints (2), and PTO telescoping surface.

NOTE: Use only a grade Type II tube grease.

3). Before each use check to make sure all safety features are installed and work-

ing properly.

4). Keep blades sharp and balanced at all times. When replacing blades, replace

all 3 blades and blade bolts at the same time.

NOTE: Blade bolts are left hand thread!

5). Periodically check all nuts, bolts, and belt to insure they are tight and secure.

Figure C

(grease points at arrows)