Product Manual

TRANSPORT SAFETY
 Comply with state and local laws governing highway safety and movement of
farm machinery on public roads.
 The use of flashing amber lights is acceptable in most localities. However, some
localities prohibit their use. Local laws should be checked for all lighting and
marking requirements.
 At all times, when driving the tractor and equipment on the road or highway un-
der 20mph (32kph) use flashing amber warning lights and a slow moving vehicle
(SMV) identification emblem. Do not exceed 20 mph (32 kph). Reduce speed
on rough roads and surfaces.
 Plan your route to avoid heavy traffic.
 Always install transport locks, pins or brackets before transporting.
 Do not drink and drive.
 Be a safe and courteous driver. Always yield to oncoming traffic in all situations,
including narrow bridges, intersections, etc. Watch for traffic when operating
near or crossing roadways.
 Turn curves or go up or down hills only at a low speed and at a gradual steering
angle. Make certain that a least 20% of the tractor’s weight is on the front
wheels to maintain safe steerage. Slow down on rough or uneven surface. Al-
ways check tractor manual for proper use on slopes.
 Be careful when turning sharp corners.
 Never allow riders on either tractor or post hole digger.
STORAGE SAFETY
 Following operation, or when unhooking the post hole digger, stop the
tractor, set the brakes, disengage the PTO, shut off the engine and re-
move the ignition keys.
 Store the unit in an area away from human activity.
 Do not park equipment where it can be exposed to direct contact to livestock for
long periods of time. Damage and livestock injury could result.
 Make sure all parked machines are on a hard, level surface and engage all safe-
ty devices.
13