Instructions / Assembly

11
1. Tighten the hose fittings into the venturis with a torque wrench, up to a torque of 95 to 105 lb./in.
Alternatively, hand tighten securely and then, using a wrench, tighten an additional 1-1 1/2 turns.
NON-ADJUSTABLE
REGULATOR
VENTURI TUBE
VENTURI TUBE
1/8 MALE PIPE THREAD
WITH ORIFICE
1/8 MALE PIPE THREAD
WITH ORIFICE
TYPE 1
CONNECTION
* Model May Vary From Picture
HOSE ASSEMBLY INSTRUCTIONS
Required Tools: Adjustable Wrench and Screwdriver
1. Attach handle by inserting bolts through supplied holes on basket and handle (round head of bolt to inside of
pan.) Apply nuts and tighten.
2. Go to the Use and Care section of this manual for further instructions.
* Model May Vary From Picture
FRY BASKET HANDLE ASSEMBLY
INSERT BOLTS
IN MARKS AS
INSTRUCTED