Instructions / Assembly

11
Required Tools: Adjustable Wrench and Screwdriver
1. Attach handle by inserting bolts (round head to inside of pan) into holes indicated in black. Apply nuts and
tighten.
2. Some models of baskets have a 4 bolt “square” design for assembly. Attach handle by inserting
bolts through supplied holes on basket and handle (round head of bolt to inside of pan.) Apply nuts
and tighten.
Tighten the hose fitting into the venturi with a torque wrench, up to a torque of 95 to 105 lb./in.
Alternatively, hand tighten securely and then, using a wrench, tighten an additional 1-1 1/2 turns.
ADJUSTABLE
REGULATOR
VENTURI TUBE
AIR SHUTTER
1/8 MALE PIPE THREAD
WITH ORIFICE
TYPE 1
CONNECTION
* Model May Vary From Picture
* Model May Vary From Picture
HOSE ASSEMBLY INSTRUCTIONS
FRY BASKET HANDLE ASSEMBLY
INSERT BOLTS IN MARKS AS INSTRUCTED